Can be combined perfectly flush with other Vario appliances of the 400 series

Precision crafting of 3 mm stainless steel

Solid stainless steel control knob

Highly efficient, low noise ventilation system especially with remote fan unit AR 410 110

Function for automatic, sensor-controlled power adjustment depending on the build-up of cooking vapours

Minimal planning and easy installation

Power levels depend on the remote fan unit.

Control knob with illuminated ring included in delivery.

3 electronically controlled power levels and 1 intensive mode.

Automatic sensor-controlled or manual run-on function.

Large-scale metal grease filter with high grease absorption.

Grease filter and activated charcoal filter saturation indicator.

Airflow-optimised interior for efficient air circulation.

Interval ventilation, 6 min.

Enamelled ventilation grille, dishwasher-safe.

Air exhaust bend included in delivery.

Overflow 250 ml capacity.

Cooktop-based ventilation control (with suitable cooktop).

Consumption data is referred to a configuration with the remote fan unit AR 403 122.

Energy consumption 40.4 kWh/year.

Sound level min. 57 dB / max. 71 dB normal mode.

For each VL one remote fan unit is recommended.

If operated next to gas appliances, the ventilation moulding AA 414 010 is recommended to ensure maximum performance of the cooktop.

Vario cooktops like Vario electric grill and Vario gas wok should be placed between 2 VL.

Maximum cooktop(s) width between two VL : 80 cm except with the CX 482.

Appliance can be snapped into the worktop from above.

Depending on the type of installation (surface-mounted or flush-mounted), the specific location of the cut-out and the knob positions may vary.

If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.

The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.

Additional instructions for flush mounting:

Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.

The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.

The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.

When installing a ventilation hood with air extraction mode and a chimney-vented fireplace, the power supply line of the ventilation appliance needs a suitable safety switch.

Air recirculation is not recommended in combination with Vario electric grill.

Total connected load 10 W.

Connecting cable 1.8 m with plug.

Plan a LAN cable.