Use of cookies

This Gaggenau website uses cookies so you can place items in your shopping basket and allow Gaggenau to collect anonymous statistical data to help improve the performance of the website. Ignore this message or click accept if you are happy to continue. Click the links on the bottom of this page if you would like to view more information about the cookies that are used and how to manage your settings.

 

400 series Vario flex induction cooktop 400 series Stainless steel frame Width 60 cm

VI462111


Additional information

Cooking zones
  • 2 flex induction cooking areas with each 19x23 cm (2200 W, with booster 3700 W), linked together 38x23 cm (3300 W, with booster 3700 W), with automatic extension up to 30x30 cm (3300 W, with booster 3700 W).
  • 2 flex induction cooking areas 19x23 cm (2200 W, with booster 3700 W), linked together 38x23 cm (3300 W, with booster 3700 W).
Handling
  • Control knobs with illuminated ring, cooking zone and output level markings.
  • Electronic power control in 12 output levels.
  • User friendly control with bicoloured display (white / orange).
Features
  • Flex function for rectangular cooking areas.
  • Frying sensor function.
  • Booster function.
  • Stopwatch.
  • Short-term timer.
  • Options menu.
Safety
  • Individual residual heat indicators.
  • Safety shut-off.
Planning notes
  • Depending on the type of installation (surface-mounted or flush-mounted), the specific location of the cut-out and the knob positions may vary.
  • The horizontal positioning of the knobs may be aligned with the specific cooking areas.
  • The drawing "Installation of the control knob" must be observed if the panel is more than 23 mm thick (there must be a recess at the rear).
  • If installing filler strip VA 450 take into account the additional space required for the depth.
  • If combining several appliances with at least one appliance cover, the filler strip VA 450 is required to compensate for the depth of the appliance without the appliance cover.
  • If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.
  • In the cut-out, the installation system requires the side edge to be at least 10 mm for surface mounting and at least 13 mm for flush mounting. Ensure a continuous cut surface of 90°.
  • The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.
  • Additional instructions for flush mounting:
  • Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.
  • The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
  • The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.
  • If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs.
  • Operates with magnetic (induction) iron pots and pans only. For an optimal heat distribution, the use of sandwich bottom cookware is recommended.
  • The wok pan WP 400 001 cannot be used with this appliance.
  • Immersion depth 55 mm.
  • Panel thickness 16 - 23 mm.
  • Appliance can be snapped into the worktop from above.
  • Appliance weight: approx. 18 kg.
Connection
  • Total connected load 7.4 kW.
  • Connecting cable 1.5 m without plug.
Additional information
General
Energy input Electric
Type of control setting and signalling devices Cylindrical controls, illuminated, intgrated in furniture front, Push-to-turn
Safety device pan recognition, Power management function, Safety time-switch-off
Highlights Extended flex induction, flexInduction, fryingSensor Plus, Keep warm function, powerBoost
Energy consumption of hob 180.0 Wh/kg
Construction type
Color of frame Stainless steel
Color of surface Black, Stainless steel
Construction type Built-in
Design - line Frame
Number of electric plates 0
Number of electric cooking zones 2
Type of frame Frame
Number of gas burners 0
Number of halogen plates 0
Installation typology Built-in
Total number of positions that can be used at the same time 4
Number of radiant plates 0
Number of electric warming zones 0
Size and weight
Dimensions of the product (mm) 55 x 590 x 520 mm
Net weight (kg) 17.578 kg
Cooking zone 1
Location of 1st heating element front left
Cooking zone 2
Dimension of 2nd heating element (mm) 380 x 230 mm
Location of 2nd heating element center left
Power of 2nd heating element (kW) 3.3 kW
Type of 2nd heating element Induction heating
Cooking zone 3
Location of 3rd heating element back left
Cooking zone 4
Location of 4th heating element middle back
Cooking zone 5
Location of 5th heating element back right
Cooking zone 6
Dimension of 6th heating element (mm) 380 x 230 mm
Location of 6th heating element center right
Power of 6th heating element (kW) 3.3 kW
Type of 6th heating element Induction heating
Cooking zone 7
Location of 7th heating element front right
Cooking zone 8
Location of 8th heating element front middle / central
Cooking zone 9
Location of 9th heating element front centre/cent
Safety
Power on indicator
Residual heat indicator Separate
Safety device pan recognition, Power management function, Safety time-switch-off
Main on/off switch
Connection
Length electrical supply cord (cm) 150 cm
Electrical connection rating (W) 7,400 W
Energy input Electric
Frequency (Hz) 50; 60 Hz

Accessories

Downloads